![](https://cubeco.fi/wp-content/uploads/sites/2/2023/10/Cubeco_jauhe-Suuri.jpeg)
Cubeco is made from demolition materials. Instead of being landfilled, the materials are cleaned and recycled into new raw materials with the help of WasteX technology. Examples of demolition materials used in the manufacture of Cubecos are glass, brick, concrete, gypsum and mineral wool.
After the WasteX process, the raw materials are made into a mass with the properties of concrete without the emissions of concrete using the recipe we developed. Get to know the material innovation Geoblend® here.
Construction waste, which previously caused environmental problems, will serve as a source for new raw materials in the future.
1. Pre-sorting of demolition waste
The material collected from the demolition sites is pre-sorted for cleaning.
2. Cleaning
The demolition material is cleaned and separated from plastics, wood, metals and aggregates.
3. Crushing
The cleaned demolition material, such as mineral wool, bricks, concrete or glass, is crushed into a coarse grain size.
4. Grinding
The crushed demolition material is ground into a fine powder, which can be used as a raw material for the production of concrete-like materials.
5. Production of a mass
The powdered raw material is made into a mass with the properties of concrete without the emission of concrete using the recipe we have developed.
6. Final products from demolition waste
The material can be made from e.g. different coatings, molded or pressed infrastructure and interior products.
Cubecos are the last step in our innovation series. The first two are the WasteX technology that grinds demolition waste and our material innovation Geoblend®. Together, these three form Closed Loop Solutions.
EcoUp material technology, Geoblend®
Waste-based recycled raw materials can be put to good use with the help of our material innovations. When cement (concrete’s binder) is completely or partially replaced with a waste-based binder, a hard material similar to concrete is produced, with a carbon footprint that is up to 80% lower compared to concrete.
Material properties
Weight 2300 kg / cube
Compressive strength 28-60 MPa. depending on recipe
Bending strength 3.5-7 MPa. depending on the recipe